2x antennas with real working spring function

Antennas with spring function, nickel,0.3 to 0.4 mm thick!!! 1:32 Item number: FM21239 These antennas are specially made for Farmmodels.You can mount them directly in the cabin, or as shown in the example pictures in an aluminum pipe of 1 mm diameter.to make nice realistic antennas.Cut a piece of pipe off (1 cm to 1.5 cm) with a sharp knife, as shown in the picture.(Roll / cut the pipe so that the hole remains open)Then drill a hole of 1 mm in the roof or the cabin style.If you want to place the antenna support on top of the roof, glue the aluminium pipe in this way, after which you lower the antenna into the hole with a little glue attached…If you want to place the antenna support on the side of the roof or the cab style, just bend the cut piece of aluminium pipe with pliers or between your fingers, and glue it into the drilled hole of 1 mm, after which you lower the antenna into it with a little glue attached…This set only contains 2 antennas